Venetian, Vikings Boat Parade

-


Venetian Festival festival is a big fundraiser for local charities put on by the Cow Hill Yacht Club.  It starts out Friday evening with a kid's tent down town.  (Later the tent becomes a beer tent.) BB took Myles to that while I messed around in my garage. (see side note at bottom)

 Saturday was rather gloomy all day and we had friends over.  Then cleared up in the evening just in time for the boat parade.  We had planned to watch the parade from the marina with our friends but they ended up heading home early. All that swimming I think tired them out.  So we headed out for a little motor ride and anchored in the moring area with the other boats.  This was a super choice the boat parade circuled us.  The theme this year was Vikings and the boat decorating competion was fierce.
A crowded anchorage area.


At the start of the parade our local fire boat spraying fountains of water.

Soon the Vkings arive.
Morgan Out Island with glowing dragon head.  This thing was super cool check out those paddles
The best of the night was this guy with the drums, moving oars, smoke and flame shooting from the mouth of the dragon. To bad he was a power boat.  No sail.    
Around and around us they went.



The night concluded with a super fireworks display.  Venetian festival fireworks out do the 4th in Saugatuck every year.


By the time we got back to the dock Myles was out cold in the v-berth, we had to wake him up to get to the car and by the time we got home 6 minutes down the road he was out again.  We ended up carrying him in to bed.  Guess all the kids were tired.







A side note, I'm building a new paddle for my Kayak and it is getting interesting. 


Comments

  1. Bill le SkeepAugust 14, 2016 at 5:57 AM

    Fascinating parade up there! You're quite the craftsman Chris.

    ReplyDelete

Post a Comment

Popular posts from this blog

Building a Spinnaker Sock DIY

-
Image
Spinnaker Socks are super nice for launching and recovering your spinnaker.  My last two boats have had them and after using one the benefits are clear. 1st off, sail handling is much easier especially if you're short-handed. 2nd, safety spinnaker socks let you launch and recover your spinnaker without everything being perfectly packed in a turtle bag another word fewer things to tangle up keeps it safer. Woodstock does not have one so we have not used the Spinnaker yet and our trip to Lake Mac last week would have been the ideal time to use a Spinnaker.  So it is time to look into this.  $17.00 per foot x 28 ft =$476 plus tax.  Hum lets go see what's in the garage.  Any past readers remember this old post Boom Tent   Well this is one sewing project that didn't work out. However, I still have the material sitting here on a shelf and it is light enough and long enough to make into a sock. Now just to find one of those fancy fiberglass hoops they use to ...
Read more

Main sail rigging

-
Image
This post is a quick reference for rigging the main sail of a Cape Dory Typhoon.  Each boat over time has different modifications made to it based on the skippers preferences so your boat may not be exactly like this one.  However this is how I put mine together. I   first start with tuning the mast in.  I like to have a bit of rake in the mast and to be sure that it is in column.   Next I slide the booms goose neck into the mast. I slide the boom down to the sail stop and make sure it is tight with a screw driver. Then I clip the back side of the boom to the back stay catch. After that I get to work on untwisting the main sheet.   My current main sheet set up goes something like this.  It is a bit of a variation from the original set up.  You can see I still use one of the original Schafer stand up blocks to guide the sheet line to the cam cleat but the Harken fiddle block does most of the heavy lifting here.  Later this season I'm hopping t...
Read more

A removable compression post

-
Image
So this season I have been gearing up and changing my rigging around bit by bit as I find pieces here and there.  My ultimate goal is to  rig up a mast top spinnaker for use later in the season.  So far, I've got the mast head halyard set up.  Today I took the next step and installed a removable compression post.  My Typhoon has the saddle supports that came with older Cape Dorys but I thought it best to add a bit of extra support before trying out the mast head spinnaker. So here is what you will need:  A nice piece of teak, two other (less nice) hardwood boards for underneath the floor cut to 4 1/2 inches,  epoxy, 3M permanent mounting tape and a master lock adjustable door jam.. I routered the teak to give it a soft edge for when I bang my head into it.   Nice board ready to install. Setting the Teak upper. I drilled holes in the back of the teak plate to match the mast step through bolts.  I did not remove the mast step and ...
Read more