2013 Season Ender

-
Last trip out

The season ender this weekend was delayed by one day.  We had planned to sail our last day of the season Saturday with some friends however the wind was blowing 20-25 knots.  With 2 little kids we thought it would be a bit much to take new sailing friends out on the lake.   All ended well though we made it out Sunday afternoon for one final round on the lake.




Photo of boom reef

 The wind was still blowing a pretty gusty 12-15 knots today so we stared with a reef in the main.  We are just out to relax.  I have on my sailrite main right now and it has reef points built in.  However I have not run the lines so I just roller reefed it in with the boom.  I really think the roller reefing is one of the most convenient features on this boat.  It is a bit of a pain to have to pull the topping lift off to turn the boom but really not that big of a deal.  Next season I'm going will splice in an extra clip to the topping lift line.  This clip will be used on the aft boom tang when turning it just to make is a bit safer.

Looking around.

Reach for it.
All in all we had a good short outing up and down the lake a few times.  At the end of the day I pulled the sails and put them below.  The super people here at Tower Marine will be pulling us some time this week and washing down the bottom.  I already can't wait for next spring.


Sunday Planning as we wait for the wind to drop off some.

Comments

  1. Bill le SkeepSeptember 24, 2013 at 9:42 AM

    Nice pics! So sorry the season has ended, but it does get quite wintery in Michigan! Good to see the boom being useful too; I've grimaced more than once trying to unroll that thing. I've a tang on the end allowing plenty of rotation of the boom. It's archaic but it works!

    ReplyDelete

Post a Comment

Popular posts from this blog

Building a Spinnaker Sock DIY

-
Image
Spinnaker Socks are super nice for launching and recovering your spinnaker.  My last two boats have had them and after using one the benefits are clear. 1st off, sail handling is much easier especially if you're short-handed. 2nd, safety spinnaker socks let you launch and recover your spinnaker without everything being perfectly packed in a turtle bag another word fewer things to tangle up keeps it safer. Woodstock does not have one so we have not used the Spinnaker yet and our trip to Lake Mac last week would have been the ideal time to use a Spinnaker.  So it is time to look into this.  $17.00 per foot x 28 ft =$476 plus tax.  Hum lets go see what's in the garage.  Any past readers remember this old post Boom Tent   Well this is one sewing project that didn't work out. However, I still have the material sitting here on a shelf and it is light enough and long enough to make into a sock. Now just to find one of those fancy fiberglass hoops they use to ...
Read more

Main sail rigging

-
Image
This post is a quick reference for rigging the main sail of a Cape Dory Typhoon.  Each boat over time has different modifications made to it based on the skippers preferences so your boat may not be exactly like this one.  However this is how I put mine together. I   first start with tuning the mast in.  I like to have a bit of rake in the mast and to be sure that it is in column.   Next I slide the booms goose neck into the mast. I slide the boom down to the sail stop and make sure it is tight with a screw driver. Then I clip the back side of the boom to the back stay catch. After that I get to work on untwisting the main sheet.   My current main sheet set up goes something like this.  It is a bit of a variation from the original set up.  You can see I still use one of the original Schafer stand up blocks to guide the sheet line to the cam cleat but the Harken fiddle block does most of the heavy lifting here.  Later this season I'm hopping t...
Read more

A removable compression post

-
Image
So this season I have been gearing up and changing my rigging around bit by bit as I find pieces here and there.  My ultimate goal is to  rig up a mast top spinnaker for use later in the season.  So far, I've got the mast head halyard set up.  Today I took the next step and installed a removable compression post.  My Typhoon has the saddle supports that came with older Cape Dorys but I thought it best to add a bit of extra support before trying out the mast head spinnaker. So here is what you will need:  A nice piece of teak, two other (less nice) hardwood boards for underneath the floor cut to 4 1/2 inches,  epoxy, 3M permanent mounting tape and a master lock adjustable door jam.. I routered the teak to give it a soft edge for when I bang my head into it.   Nice board ready to install. Setting the Teak upper. I drilled holes in the back of the teak plate to match the mast step through bolts.  I did not remove the mast step and ...
Read more