Skip to main content

Search This Blog

Bristol-Blue Lake Michigan Sailing Adventures

We live, sail, and play along the shorelines of Lake Michigan. Sailing our Mirage 24. DIY sailboat projects .

Home

Posts

Showing posts with the label Teak oil vs varnish

No results found

Powered by Blogger

Theme images by Galeries

Chris

Archive

2024 5

2023 4
- December 1
- October 1
- August 1
- July 1
2022 4
- July 1
- June 1
- May 1
- April 1
2021 20
- October 1
- August 3
- July 1
- June 2
- May 4
- April 4
- March 4
- January 1
2020 16
- December 2
- November 2
- September 1
- August 1
- July 3
- May 4
- February 2
- January 1
2019 27
- December 1
- November 2
- September 2
- August 5
- July 4
- June 4
- May 5
- April 1
- January 3
2018 14
- August 1
- July 3
- June 3
- May 3
- April 1
- March 1
- February 1
- January 1
2017 12
- December 1
- November 1
- August 2
- July 2
- June 1
- May 1
- April 3
- January 1
2016 28
- December 1
- November 1
- October 2
- August 2
- July 4
- June 3
- May 3
- April 6
- February 2
- January 4
2015 31
- December 1
- November 2
- September 2
- August 1
- July 2
- June 3
- May 5
- April 4
- March 5
- February 5
- January 1
2014 35
- December 2
- October 2
- September 3
- August 4
- July 4
- June 3
- May 4
- April 6
- March 2
- February 1
- January 4
2013 20
- December 2
- November 1
- October 4
- September 1
- August 2
- July 1
- June 2
- May 2
- April 3
- February 2
2012 10

Show more Show less

Total Pageviews

Popular posts from this blog

A removable compression post

- June 06, 2013

So this season I have been gearing up and changing my rigging around bit by bit as I find pieces here and there. My ultimate goal is to rig up a mast top spinnaker for use later in the season. So far, I've got the mast head halyard set up. Today I took the next step and installed a removable compression post. My Typhoon has the saddle supports that came with older Cape Dorys but I thought it best to add a bit of extra support before trying out the mast head spinnaker. So here is what you will need: A nice piece of teak, two other (less nice) hardwood boards for underneath the floor cut to 4 1/2 inches, epoxy, 3M permanent mounting tape and a master lock adjustable door jam.. I routered the teak to give it a soft edge for when I bang my head into it. Nice board ready to install. Setting the Teak upper. I drilled holes in the back of the teak plate to match the mast step through bolts. I did not remove the mast step and put extended bolts on. I wanted a smoot

Main sail rigging

This post is a quick reference for rigging the main sail of a Cape Dory Typhoon. Each boat over time has different modifications made to it based on the skippers preferences so your boat may not be exactly like this one. However this is how I put mine together. I first start with tuning the mast in. I like to have a bit of rake in the mast and to be sure that it is in column. Next I slide the booms goose neck into the mast. I slide the boom down to the sail stop and make sure it is tight with a screw driver. Then I clip the back side of the boom to the back stay catch. After that I get to work on untwisting the main sheet. My current main sheet set up goes something like this. It is a bit of a variation from the original set up. You can see I still use one of the original Schafer stand up blocks to guide the sheet line to the cam cleat but the Harken fiddle block does most of the heavy lifting here. Later this season I'm hopping to switch this system out for a traveler.

Building a Spinnaker Sock DIY

- September 13, 2019

Spinnaker Socks are super nice for launching and recovering your spinnaker. My last two boats have had them and after using one the benefits are clear. 1st off, sail handling is much easier especially if you're short-handed. 2nd, safety spinnaker socks let you launch and recover your spinnaker without everything being perfectly packed in a turtle bag another word fewer things to tangle up keeps it safer. Woodstock does not have one so we have not used the Spinnaker yet and our trip to Lake Mac last week would have been the ideal time to use a Spinnaker. So it is time to look into this. $17.00 per foot x 28 ft =$476 plus tax. Hum lets go see what's in the garage. Any past readers remember this old post Boom Tent Well this is one sewing project that didn't work out. However, I still have the material sitting here on a shelf and it is light enough and long enough to make into a sock. Now just to find one of those fancy fiberglass hoops they use to make these things

Some Other Great Reads

The $tingy Sailor

Handy and Cheap Line Hangers - When I first started sailing, I stored all my unused lines, sheets, and cords in a large plastic bag in the starboard lazarette. I knew there was a better ...
3 months ago
Sail Far Live Free - Sailboats, Sailing News, and Gear

Power on the Go: Jackery Explorer 300 Portable Power Station Review - Having backup electrical power is a necessity for my peace of mind while on the water. A large housebank of batteries, solar panels, and wind generators...
1 year ago
Sailing, Simplicity, and the Pursuit of Happiness

Our New Sailing Podcast! - Dive deep into the substance of sailing’s most engaging topics. During The Morning Muster we catch up with cruisers, maritime professionals, old salts, a...
3 years ago
Hobo Sailor

A Failed Dream? - I left the Bahamas in 2009 as a 25-year-old with a single mind. To go back home, make enough money to buy a Lagoon 380 Catamaran. Pay it off, and sail it...
3 years ago
Shenanigans: A Chaser 29 Sailboat

New Boat New Blog - Hi it has been a while and taken longer than expected but we have found our new boat you can follow us and are new Cape Dory Typoon at http://bristol...
11 years ago
MaryMcKSchmidt.com - Mary McKSchmidt Blog

-

Show 5 Show All

Posts

Posts

All Comments

All Comments