Bristol-Blue Lake Michigan Sailing Adventures

Loading up this weekend.  It rained here so I didn't get the last coat of varnish on yet but I was able to get all the Gear and sails down to the boat.  The motor got to ride shot gun in the front seat.  Everything else fit in the back. Yeah my little vw clown car can pack it in.  

Friday my parents were coming into town so hanging around the house I sewed this handy little bumper cover up.  The bumper is one of the good ones you can reinflate with an air compressor but it is getting a but dried out and scuffed the hull last year.  Nothing that didn't buff right out but I thought I'd sew up a cover to prevent it again this season.  This took about 30 minutes including heating up the iron deflating the bumper sewing then reinflating the bumper once it was inserted int the cover.  Not bad. Saturday I got down and put a base coat on the toe rails.  Sunday I came back gave the toe rails their second coat and did the maintance coat for the season on the rest of the teak.  We are really coming along.  One or two more coats of varnish then buff out the deck I'll be ready to launch! Those are tooth picks in there so I can lock up for the night with out having varnished my drop boards together.  

So it snowed here again Wednesday.  Nothing stuck and hopefully it will be the last time for the year.  The orchards in the area are looking like they are getting ready to bloom soon and a hard frost canbe devastating in this area for the farmers.    Regardless, it is still cold here this Saturday morning and the boat yard was pretty quiet until afternoon.  I ran into one guy who came over from Chicago to work on his boat.  Our marina has a lot of boat owners from out of state due to the high cost of keeping a boat in the city.  He said he is hoping tomorrow it will get warm enough for him to do his bottom paint.  If the forecast is right he just might get lucky before he has to head back to the city.   The cold weather isn't going to interfere with any of my plans for the day. I  started by cleaning the teak in preparation for varnishing.  This time I used Meguiare's teak cleaner.  It came with a pour out bottle top but I switched it out with a sprayer top.  This made cleaning

So this Saturday I started some varnish maintance.  It has been three years since I've done anything to the toe rails. I think, at most, I put two coats of varnish on them to begin with. So, it is no surprise they have started to break down.  The drop boards, and combing boards look great.  Plenty of maintance coats on those pieces so I won't mess with them.  Looking around online I read the best way to pull the old varnish up is to use a heat gun.  It worked great the varnish scraped right off with minimal damage to the teak underneath.  I'll go over it with some teak cleaner and try to get some varnish back on them before launch the launch date.   Today, Wednesday it is snowing.  Have to laugh sunburn and frost bite in the same week.  Hope it warms back up before the weekend.

So last weekend I headed down to put a coat of bottom paint on Kraken.  I knew I did not have enough paint to finish the job and figured I'd stop for lunch and pick up a quart on the way back.  After searching West Marine's shelves and finding nothing, I got some help and found out the nearest quart was in Washington.  They would have to order it in for me.  Kraken sat for the week with three quarters of the bottom painted. It looked kinda silly. This weekend,  I am on a winning streak,  just like the Detroit Tigers.  I picked up the paint this morning and even made it into Randy's West Shore Boat Repairs.  Randy's shop is tucked away I the back side of Douglas. It is a friendly place.  It also happens to be one of the only places I know that carries the spark plug I need for my Mercury 2.5hp in stock.  I've also dealt with him a few other times when rebuilding my British Sea Gull.  An over all great place to get weird parts and pieces.  I found out today they also

Here is an old pic. for throw back Thursday.

Well I packed up and headed for the marina this afternoon.  I spent the morning running around town gathering cleaners and buffing pads.  When I left it was 19 degrees.  By lunch time the temperature had broke freezing we are at about 34. Figured I'd get a jump on cleaning the hull.  After getting to the marina and untarping the boat, I went to get water.  The marina understandably has not turned it on yet but I was hoping.  So plan B work on the boom tent.   I started by sizing the tent poles and clipping them to size. Then I spread the canvas over the boom just to get a look at things.  The final plan the canvas will be below the boom and it will be a free standing structure. Here is a view from the inside.  After a few minutes it started to get warm inside.  Which confirms my suspicions.  This tent will need some screening for ventilation especially once summer arrives.  I even got a chance to test out the water proofing.  The canvas beads up really nicely. Back to the sewing ma